Piergiacomi

DPF300

Manual PCB separator with milling cutter for small and medium-sized separation requirements.
- Replaceable guide made of hardened and tempered steel; standard thickness: from 0.8 to 3.175 mm.
- Carbide milling cutter, specially developed for FR4, CEM, and aluminum circuit boards. Standard diameter: 0.8–3.175 mm.
- Speed of the electric micro spindle: max. 24,000 rpm.
- Integrated electric extraction system, installed directly on the replaceable guide, with integrated cartridge filter (1" -1/4).
- Laminated ESD-safe workbench with EPB 90°, galvanized steel feet at the front and rear swivel casters with brakes Ø 80.

TECHNICAL DATA OF THE CIRCUIT BOARD
- Thickness of the circuit board: max. 4 mm
- Slot length (L): min. 11 mm
- Slot width (V): for a standard guide 0.8–3.175 mm
- Tolerance 0/-0.02 mm
- Isthmus distance from components (C): min. 1 m
- PCB materials: FR4–CEM–ALU (special milling cutters are required for aluminum PCBs)
- CE marked